Specifications

9030920 E6 Configuration Views
3-29
SynOptics Chassis Configuration View
Module Configuration Table
SynOptics Module Configuration View
Double-clicking on an entry in the Module Configuration Table in the
SynOptics Chassis Configuration view opens the SynOptics Module
Configuration View. This view provides the following information:
Module Number
The number of the slot in the hub containing the module.
Module Type
The ID for the module. Values are specified in SynOptics technical documents.
Module Medium-Dependent ID
The ID of the medium-dependent part of the board. The value is board
dependent. Values are specified in SynOptics technical documents.
Module Description
The model number and description of the module.
Board Hardware Version
The hardware revision of the module.
Board ID
The ID of the board, which is ‘hard-coded’ in the board, and identifies the
board’s basic functionality. Some boards have the capability to change aspects
of their functionality, such as media type, interface types, or power supply
wattages, by plugging in different daughter cards. Other boards may identify
the type of cable plugged into them.
Board Status
Indicates the operational status of the module. This may display as OK or
Fail.
Board Reset Status
This field provides a button that allows you to reset the status of the module.
Options are Resetting or Not_Resetting.
Board Power Supply Status
The operational status of the board power supply. This may display as OK or
Fail.
Board NM Control Status
Indicates whether the module is under network management control. The
module, or one or more ports, may be controlled (partitioned) by network
management.
Board Partition Status
This field provides a button that allows you to control whether the module is
partitioned or enabled. Options are Enabled, Partitioned or Timed_Partition.
Partition Time (Seconds)
You must enter the duration value when partitioning the board for a specified
time with the Timed_Partition option of Board Partition Status.