Specifications

9030920 E6 Configuration Views
3-27
SynOptics Chassis Configuration View
SynOptics IPX Trap Receiver View
SynOptics IPX Trap Receiver View
The SynOptics IPX Trap Receivers view provides a list of NMSs that are to
receive traps generated by this NMM sent over IPX. Double-click any entry to
open the SynOptics IPX Trap Receiver Entry view which provides the same
information (except status) in a modifiable format and allows you to delete an
entry.
This view provides the following information:
Status
Indicates the action status for the entry.
IPX Address
Displays the IPX address for trap server that is to receive the trap. The value
may only be written when the row is created. This is written in the format
network:host, with the network eight hexadecimal digits, and the host twelve
hexadecimal digits.
Community Name
Displays the community string used for traps sent to this trap receiver.
Age Time
Indicates the time interval used to age entries out of the trap receiver table.
The default value, if not specified, will be 0 or infinite, never to be aged out.
Opens the SynOptics IPX Trap Receiver Add Entry view. This view allows you
to enter the information in the IPX Trap Receivers Table for an entry.
SynOptics Chassis Configuration View
This view provides the following information about the chassis in addition to
the Module Configuration Table described below. You can access this view by
selecting Chassis Configuration from the Icon Subviews menu.
Power Status
The status of the hub power supply. This may display as OK, PrimaryFail,
SecondaryFail, or BothFail.
Device Type
The chassis type.
Backplane Type
The type of backplane on the chassis.
Backplane Ethernet Channel Division
A value that describes the divisions of the segmentable ethernet channel. The
value is a sum (i.e., integer bit string). This value initially takes the value of
Add IPX Trap Receiver Table Entry