Specifications

Device Configuration
Configuration Views SynOptics Series 3000 Hub
3-20 Management Module Guide
Device Configuration
This menu selection provides access to the following views. These views
contain network configuration information for the SynOptics Model 3000
Series hub device. To access these views, select Device Configuration from
the Icon Subviews menu for the device and then one of the following menu/
view selections.
• Configuration View/SynOptics Configuration View
• Agent Download/SynOptics Agent Download View
• Agent Protocol/SynOptics Agent Protocol Configuration View
• Agent Configuration/SynOptics Agent Configuration View
• Agent Hardware/SynOptics Agent Hardware View
• IP Trap Receivers/SynOptics IP Trap Receiver View
• IPX Trap Receivers/SynOptics IPX Trap Receiver View
SynOptics Configuration View
This view provides the following information:
Flash Status
Indicates the operational status of the flash device of the agent. A Fail
indicates that either the flash device configuration on board is not valid or the
flash electrically erasable programmable read only memory (EEPROM) on the
board has failed. Options are Fail, OK, or Other.
Agent CPU Idle Time
Displays the count of the idle time of the agent in
days+hours:minutes:seconds.
Unauthorized IP Address
Displays the IP address of the last station that tried to access this agent with
an invalid community string.
Unauthorized Community Name
Displays the community string of the last unauthenticated attempt to access
this agent.
Unauthorized IPX Address
Displays the IPX address of the last unauthenticated attempt to access this
agent.
SynOptics Agent Download View
The SynOptics Agent Download view is divided into two major sections and
provides the following information: