Specifications

9030920 E6 Configuration Views
3-11
Token Ring Configuration
Token Ring Configuration
This menu selection provides access to the following views. These views
contain network configuration information for the SynOptics Model 3000
Series Token Ring hub device. To access these views, select Token Ring
Configuration from the Icon Subviews menu for the device and then one of
the following menu/view selections.
• Station Table/SynOptics Token Ring Station Table View
• Station Total Errors/SynOptics Token Ring Total Errors Table View
• Station Non-Isolating Errors/SynOptics Token Ring Station Non-
Isolating Errors View
• NMM Topology Table/SynOptics Token Ring NMM Topology Table View
• TR NMM Configuration/SynOptics Token Ring NMM Configuration
View
• Threshold/SynOptics Ethernet Threshold Table View
SynOptics Token Ring Station Table View
This view displays pie chart statistics for isolating and non-isolating. For
information on pie charts refer to the SPECTRUM Views. This view also
displays the following information:
MAC Address
The MAC address of the station.
Slot
The board index that the host is connected through.
Port
The number identifying the port.
Beacon Status
The beaconing status of the station.
Functional Addr
The functional address used by the station (this value may or may not be the
station’s MAC address).
Classes
Specifies the functional classes allowed to be active in the station.
Priority
The maximum priority the station is allowed to use.
Group Address
The group address of the station.
Station ID
An octet string used to uniquely identify the station.