Specifications

Ethernet Configuration
Configuration Views SynOptics Series 3000 Hub
3-10 Management Module Guide
• Station thresholds only:
- removeMAC- Send Remove MAC frame to station identified by MAC
address contained in the threshold MAC Address.
- trapRemoveMAC- Send a trap and then send a Remove MAC frame to
the station identified by the MAC address contained in the threshold
MAC Address.
Exceed Count
Counter for how many times the settled threshold has reached its setting
value.
Add Threshold
The Add Threshold buttons allow you to add or change information to the
ring, station, or port as follows:
1. Click the applicable button.
2. Within the view that opens, make any changes to, or add new thresholds
as needed.
3. From the File Menu, Save Changes.
The Ring and Station views display the following additional information:
NOTE
The timing and frequency of the action taken when the threshold condition is
met is dependent upon the threshold Condition value and the length of the
duration window.
• If the threshold Condition is crossValue, the action will be taken only
once during the durationwindow of the sampling period in which the
condition is first met.
• If the threshold Condition is overValue, the action will be taken at each
sampling period in which the condition is met until the end of the
duration window.
• If the threshold Condition is overRate, the action will be taken only
once at the end of the duration window if the condition is met.