Specifications

Ethernet Configuration
SynOptics Ethernet Threshold Table View
Configuration Views SynOptics Series 3000 Hub
3-6 Management Module Guide
Port
The port index that the host is connected through.
Type
The type of address that is stored in the Net Addr for this device.
Net Addr
The network address (in network order) of the MAC/Network address pair.
MAC Address
The network address (in canonical order) of the MAC/Network address pair.
Vendor
The vendor of the device connected to that port. This is determined from the
MAC address.
Learn
The method that was used to discover the MAC/Network address pair.
Possible methods are:
• Other - unknown method
• arpRequest - ARP request packets
• arpResponse - ARP response packets
• ripRequest - RIP request packets
• ripResponse - RIP response packets
Time Stamp
The value of sysUpTime when the MAC/Network address pair was last
observed on the segment.
SynOptics Ethernet Threshold Table View
The Thresholds Table View provides the following information:
Index
The index into the Threshold table.
Object
Specifies the part of the concetrator the threshold applies. Possible values are:
• Other- Unknown threshold error.
• Port- Applies to a specific port in the concentrator.
• Ring- Applies to the ring to which the NMM is connected.
• Station- Applies to a specific station identified by the MAC address.
NOTE
All values are read-write with the exception of “other” which is read-only.