Specifications

9030920 E6 Configuration Views
3-3
NMM Nodes
SynOptics Token Ring Find Nodes Table View
Port
The port number.
Address
The physical MAC address.
Vendor
The vendor of the device connected to that port. This is determined from the
MAC address.
SynOptics Token Ring Find Nodes Table View
This table contains a list of all of the active nodes that are currently connected
to the ring through this concentrator. The Show Nodes and Find Nodes tables
differ in their indexing. The Find Nodes table identifies a module and port for a
given NMM’s interface and a given MAC address.To access this view, select
Find Nodes from the NMM Nodes menu for the device icon.
Module
The module number.
Port
The port number.
Address
The physical (MAC) address.
Vendor
The vendor of the device connected to that port. This is determined from the
MAC address.
NOTE
If you get a message that the view is not available at this time, you may have
to cause the model to be reconfigured by selecting Reconfigure from the
Application View Edit menu. If you are installing over an existing Ethernet
or Token Ring version, you must reconfigure to open the Chassis
Configuration View.