User guide

FlowPoint DSL Router

IPX Routes

To seed the routing table, you will enter IPX Route Addresses using this

window.

This window displays a list of each IPX Network # with the

corresponding Hops count and number of Ticks.

The IPX routes entered here may be to an internal or external network

number depending upon how the router is being used.

The Hops count is a number greater than 1 representing the number of

routers that must be passed through to reach the network number.

The number of Ticks indicates how much time that the packet takes to

reach the network number in units of roughly 1/18th of a second. This

number must be at least 1.

⇒ To add a new entry, click Add, enter the IPX Network Number,

Hops count, and Ticks in the text box displayed, and click OK.

(The Tab key can be used to tab between each item on the entry

window.)

⇒ To delete any entry, click the line containing the entry, click Delete,

and click OK on the verification window.