User guide

FlowPoint DSL Router
54
◊◊ Password, Login, Skip
Login
⇒ Enter the Login Password admin in the Login Window.
The default login password is admin when first configuring the router.
Type it in lowercase and verify that your keyboard Caps Lock key is not
active.
⇒ You will then be prompted to enter your own password twice in the
Login Password window as a security measure.
This security feature allows you to prevent unauthorized write access to
the router’s configuration.
After successfully connecting to the router, the main menu screen will
display the router’s software level, IP address, and hardware model
number.
Skip
⇒ Click Skip, if you only want to view the router’s configuration
settings.
If you attempt to change any of the router’s configuration settings while
in View-Only mode, you will again be prompted for the write enable
Login Password.
◊◊ Name, Message, Software, and Hardware
Name is the name for the target (local) router.
Message is an informational message that you can enter and save for this
display.
The Name and Message fields are blank for the initial configuration. If
you click either of these fields after the label, a menu is displayed
allowing you to alter this information. You do not need to do this at this
time; this is the same menu displayed when you click the button System
Settings later in the configuration process.
Software is the router software level.
Hardware is the Model Number, Serial Number, and Revision Level of
the router.