Technical data

174
HDSL ?
Lists the supported keywords.
Example:
hdsl?
Response:
HDSL commands:
? help terminal
save speed
HDSL SPEED
CO end:
This command is used to set the speed manually on the CO end only.
CPE end
:
The router on the CPE end is always in auto-speed mode: it uses an auto-speed algorithm to attempt
to match the CO speed. The command
hdsl speed noauto
is used to override auto-speed.
Note 1:
The command
hdsl speed
(with no option) displays the current speed if the modem has activated
successfully.
Note 2: hdsl speed noauto
should be followed by the command
hdsl save
to become persistent across reboots.
Note 3:
During auto-speed search, use the command
hdsl speed <
speed
>
to stop the search and restart it at the
speed you just entered.
384 Default speed for the CO
1168 Authorized non-default speeds for the CO in Mbps
noauto Used to override auto-speed on the CPE end
Example:
hdsl speed 1168
hdsl speed noauto
hdsl speed
HDSL SAVE
Used to save the HDSL-related changes across reboots.
Example:
hdsl save
hdsl ?
hdsl speed
[384 | 1168
|
noauto]
hdsl save