Technical data

160
REMOTE SETLNS
This command is specific to L2TP tunnel configuration. Please, refer to the L2TP commands section, page 197,
for more usage information.
REMOTE SETOURPASSWD
Sets a unique CHAP or PAP authentication password for the local router used for authentication when the local
router connects to the specified remote router. This password overrides the password set in the
system passwd
command. A common use would be to set a password assigned to you by Internet Service Providers.
password
Authentication password of the local router for use in connecting to the remote router.
Note:
the password is case-sensitive.
remoteName
Name of the remote router (character string).
Example:
remote setOurPasswd s1dpxl7 HQ
REMOTE SETOURSYSNAME
Sets a unique CHAP or PAP authentication system name for the local router used for authentication when the
local router connects to the specified remote router. This system name overrides the system name set in the
system name
command. A common use would be to set a password assigned to you by Internet Service
Providers.
name
System name of the target router.
Note:
The system name is case-sensitive and must be no more than 50 characters.
remoteName
Name of the remote router (character string).
Example:
remote setOurSysName s1dpxl7 HQ
REMOTE SETPASSWD
Sets the CHAP or PAP authentication password used when the remote router establishes a connection or is
challenged by the target router.
password
Authentication password of the remote router. Not that the password is case-sensitive.
remote setLNS
<TunnelName><remoteName>
remote setOurPasswd
<
password
> <
remoteName
>
remote setOurSysName
<
name
> <
remoteName
>
remote setPasswd
<
password
> <
remoteName
>