Technical data

156
IPX SAP INFORMATION FOR <ISP>
Total IPX SAPs....................... 0
SERV312_FP 00001001 00:00:00:00:00:01 0451 0004 1
REMOTE LISTPHONES
Lists the PVC numbers available for connecting to the remote router.
remoteName
Name of the remote router (character string).
Example:
remote listPhone HQ
Response:
PHONE NUMBER(s) FOR <HQ>
Connection Identifier (VPI*VCI)...... 0*38
Note:
If the remote name is not specified, a list of phone numbers is displayed for each remote router in the
database.
REMOTE SETATMTRAFFIC SCR MBS
This command applies only to ATM routers. Please refer to page 166 for more syntax information.
REMOTE SETAUTHEN
Sets the authentication protocol used when communicating with the remote router. The authentication protocol is
the minimum
security level that the target router must use with the remote router; this level is verified during
security negotiation. The router will
always
attempt to negotiate the highest level of security possible (CHAP).
The router will not accept a negotiated security level less than this minimum authentication method.
The parameter in the remote router database is used for the local side of the authentication process; the minimum
security level used by the target router when challenging or authenticating the remote router.
protocol
chap
,
pap,
or
none
. The default is
pap
.
remoteName
Name of the remote router (character string).
Example:
remote setAuthen pap HQ
remote listPhones
<
remoteName
>
remote setATMTraffic scr mbs <
remoteName
>
remote setAuthen
<
protocol
> <
remoteName
>