Technical data

154
REMOTE LIST
Lists the remote router entry in the remote router database or all the entries in the database. The result is a
complete display of the current configuration settings for the remote router(s), except for the authentication
password/secret.
remoteName
Name of the remote router (character string)
Example:
remote list HQ
Response:
INFORMATION FOR <HQ>
Status............................... enabled
Our Password used when dialing out... no
Protocol in use...................... RFC1483 (SNAP) - Frame Relay IP
Connection Identifier (VPI*VCI)...... 0*38
IP address translation............... off
Compression Negotiation.............. off
Source IP address/subnet mask........ 0.0.0.0/0.0.0.0
Remote IP address/subnet mask........ 0.0.0.0/0.0.0.0
Send IP RIP to this dest............. no
Send IP default route if known..... no
Receive IP RIP from this dest........ no
Receive IP default route by RIP.... no
Keep this IP destination private..... yes
Total IP remote routes............... 1
128.1.0.0/255.255.0.0/1
IPX network number................... 00000789
Total IPX remote routes.............. 1 00001001/1/4
Total IPX SAPs....................... 1
SERV312_FP 00001001 00:00:00:00:00:01 0451 0004 1
Bridging enabled..................... yes
Exchange spanning tree with dest... no
REMOTE LISTBRIDGE
Lists the bridging capability from the target router to the remote router.
remoteName
Name of the remote router (character string).
Example:
remote listBridge HQ
Response: BRIDGING INFORMATION FOR <HQ>
Bridging enabled................... yes
Exchange spanning tree with dest.... yes
remote list
[<
remoteName>
]
remote listBridge
<
remoteName
>