Technical data

135
•ipxroutes
Example:
system supporttrace
SYSTEM TELNETPORT
The router has a built-in Telnet server. This command is used to specify which router’s TCP port is to receive a
Telnet connection.
Note:
This command requires a save and reboot to take effect.
default The default value is 23.
disabled The router will not accept any incoming TCP request.
port
Port number of the Ethernet LAN. It is recommended that this number be > 2048 if not 0
(disabled) or 23 (default).
Example:
system telnetport default
system telnetport disabled
system telnetport 3333`
SYSTEM WAN2WANFORWARDING
This command allows the user to manage WAN-to-WAN forwarding of data from one WAN link to another.
For example, if the router is used at home to access both a company network and the Internet at the same time,
and it is desirable that company information not pass to the Internet, then disable WAN-to-WAN forwarding.
on Used to allow data to be forwarded from one WAN link to another link.
off Used to stop the data from being forwarded from one WAN link to another WAN link.
Example:
system wan2wanforwarding on
system supporttrace
system telnetport
default|disabled
|
<
port>
system wan2wanforwarding
on|off