Technical data

134
time in Minute
Length of time in minutes
Auto logout can be disabled by setting the <time in minute> to zero.
Example:
system securityTimer 15
SYSTEM SNMPPORT
This command is used to manage SNMP port access; this includes disabling SNMP, reestablishing SNMP
services, or redefining the SNMP port for security reasons. Refer to
Advanced Features - Management Security
in
Chapter 4.
Note:
This command requires a save and reboot to take effect.
default Restores the default values to 161
disabled Disables remote management.
port
Used to define a new SNMP port number.
Use this option to redefine the SNMP port to a non well-known value to restrict remote access.
Example:
system snmpport default
system snmpport disabled
system snmpport 3333
SYSTEM SUPPORTTRACE
This command lets you capture to a file all of the configuration data that Technical Support may need to
investigate configuration problems. This exhaustive list command incorporates the following commands:
• system history
•vers
•mem
• system list
•eth list
• dhcp list (if DHCP is enabled)
• remote list
•ifs
• bi (if bridging)
•ipifs
• iproutes
system snmpport
default|disabled
|
<
port>