Technical data

131
Note 2:
To list the range of allowed clients, use the command system list when logged in with read and write
permission (log in with password).
first ip addr
First IP address in the client range
last ip addr
Last IP address in the client range. May be omitted if the range contains only one IP address.
LAN Local Ethernet LAN
Example:
system deltelnetfilter 192.168.1.5 192.168.1.12
SYSTEM DELUDPRELAY
This command deletes the port range that was previously enabled by the command:
system addUDPrelay.
ipaddr
IP address of the server
first port
First port in the UDP port range to be deleted
all
Deletes all existing UDP ports
last port
Last port in the UDP port range to be deleted
Example:
system deludprelay 192.168.1.5 all
SYSTEM HISTORY
Displays the router’s most recent console log.
Example:
system history
SYSTEM LIST
Lists the target router’s system name, security authentication protocol, callerID and ‘data as voice’ status, and
system message.
Example:
system list
Response:
GENERAL INFORMATION FOR <SOHO>
System started on.................... 1/7/1998 at 13:29
system delTelnetFilter
<first ip addr>
[
<last ip addr>
] | LAN
system delUDPrelay
<ipaddr> <first port>| all [<last port>]
system history
system list