Specifications

Configuration Views DOD Configuration View
Device Management Page 48 Efficient Networks DSL Router Series
IP Opt Send RIP1
Allows sending of RIP packets to this destination
when connected and IP routing is enabled for RIP
1 only.
IP Opt Recv RIP2
Allows processing of RIP packets received from
this destination when connected and IP routing is
enabled for RIP 2 only.
IP Opt Send RIP2
Allows sending of RIP packets to this destination
when connected and IP routing is enabled for RIP
2 only.
Protocol
Type of protocol used for communicating with this
remote. Possible values are listed in Table 19.
Compression
When enabled, compression is done.
Password Specified
Returns “true” if the password for this remote
connection has been specified.
Our Password Specified
Returns “true” if our password for this remote
connection has been specified.
Table 19: Protocol Types
Type Description
protocolppp PPP VC-multiplexed
protocol1483pppllc PPP LLC-multiplexed
protocol1483snap RFC1483/1490 (SNAP)
protocol1483snapmer RFC1483/1490 MAC
Encapsulated Routing
protocol1483snapfr FRF.8 Compatibility
protocolrawip No encapsulation: Raw IP