Specifications

Configuration Views DOD Configuration View
Device Management Page 47 Efficient Networks DSL Router Series
IPX Net Str Address
The IPX network address associated with this
WAN link.
PPP Callback Option
Defines the circumstances under which this
system would request a Callback by using a
method within the PPP Protocol suite (as opposed
to ISDN callback). Possible values are listed in
Table 18.
PPP Callback Info
When PPP Callback Option is set to something
other than none, this field contains additional
information sent on the Callback.
Don’t Authenticate
When enabled, authentication is not required
when dialing out.
IP Addr Translation
When enabled, IP address translation is done.
Ip Opt Recv RIP1
Allows processing of RIP packets received from
this destination when connected and IP routing is
enabled for RIP 1 only.
Table 17: Callback Values
Value Description
enable Call remote and dialback.
disable Never dialback this remote.
callback-only
Call only to perform dialback.
Note:
Note:
In order to implement “dialback”,
caller entries for this remote must
exist. This allows the system to
identify which remote is calling.
Table 18: PPP Callback Options
Value Description
name-string Give name in Callback info.
e164-string Give phone number in Callback
info.
location-string Give location in Callback info.
dial-string Give phone number in Callback
info.
authentication Based on authentication.
none Do not initiate PPP Callback.