Specifications

Configuration Views DOD Configuration View
Device Management Page 46 Efficient Networks DSL Router Series
BOD Type
The type of traffic to which bandwidth
management applies. Possible values are listed in
Table 16.
IP Opt Recv RIP
Allows processing of RIP packets received from
this destination when connected and IP routing is
enabled for RIP1.
IP Opt Send RIP
Allows sending of RIP packets to this destination
when connected and IP routing is enabled for
RIP1.
IP Opt Recv RIP Default
Allows updating of the IP default route when
receiving a RIP packet from this destination for
the route 0.0.0.0.
IP Opt Send RIP Default
Allows sending of the IP default route (if known) to
this destination, when connected as 0.0.0.0.
IP Opt Keep Private
Allows the route to this destination to be kept
private.
BR Opt Use Stp
Allows use of Bridging Spanning Tree Protocol
when connected to this destination.
PPP Opt Use LCP Echo
Perform a PPP LCP Echo request at regular
intervals.
Entry Is Disabled
This entry in the table is active (enabled) or
temporarily disabled.
Callback Option
Defines the circumstances under which this
system is allowed to dial the specified remote.
Possible values are listed in Table 17 (Page 47).
Send Data As Voice
Determines whether ISDN data calls issued to
this remote should be generated as voice calls
instead of restricted or unrestricted digital (ISDN
only).
Table 16: BOD Type Values
Value Description
input Incoming traffic only (from WAN).
output Outgoing traffic only (to WAN).
both Incoming and outgoing traffic.