Specifications

Configuration Views DOD Configuration View
Device Management Page 45 Efficient Networks DSL Router Series
BW Threshold
An established link’s bandwidth utilization. This
value (0 - 100) is utilized for triggering additional
links. A value of zero means all available links are
dialed while 100 means no additional links are
used.
Prefer Type
The preferred type of connection.
Tear Down Timer
The timeout limit (in seconds) to tear down this
link when there is no activity for the link.
Source IP Address
The local IP address of the WAN interface.
Remote IP Address
The remote IP address of the WAN interface.
Source IP Mask
The local IP net mask of the WAN interface.
Remote IP Mask
The remote IP net mask of the WAN interface.
IPX Net Address
The IPX net address associated with the WAN link
when connected to this remote.
IP Filters
Number of IP filters currently defined for this
remote.
IPX Filters
Number of IPX filters currently defined for this
remote.
Remote IP Nets
The number of static IP routing entries for this
Destination Name or connection.
Remote IPX Nets
The number of static IPX routing entries for this
Destination Name or connection.
Remote IPX SAPs
The number of static IPX SAP entries for this
destination.
Remote Mac State
Enables or disables the current bridge state for
this destination.
Remote Macs
Number of specific MAC addresses that are
statically bridged to this remote.
Last Activity Time
The last “activity time” with this destination.
Min Links
The minimum number of links to be used when
this system dials out or accepts incoming calls.