Specifications

Configuration Views Interface Configuration View
Device Management Page 44 Efficient Networks DSL Router Series
Interface Configuration View
Access: From the Icon Subviews menu for a selected
Interface icon in the Interface Device view, select IF
Configuration.
This view provides the following information for
the selected interface:
Operation Status
The current operational state of the interface (On,
Off, or Testing).
Admin. Status
The desired operational state of the interface (On,
Off, or Testing).
Last Change
The System UpTime value when the interface
entered its current operational state.
IP Address/Network Mask
This window provides a list of the user-defined
names and IP addresses for the interface.
Physical Address
The Ethernet (MAC) address of the interface.
Bandwidth
The estimated bandwidth of the interface,
measured in bits per second. For interfaces that
do not vary in bandwidth, or for which no
accurate estimate can be made, a nominal
bandwidth is provided.
Packet Size
The largest packet that can be transmitted or
received by the port, displayed in octets.
Queue Length
The length of the outbound packet queue, in
packets.
DOD Configuration View
Access: From the Icon Subviews menu for the dodApp
Application icon, select DOD Configuration.
This view contains the following information:
Table ID
The identifier number of the remote destination.
Destination Name
A description of the remote destination.
Authen Protocol
The minimum authentication protocol this remote
connection is using. Possible values are: chap,
pap, and none.
Max Links
The maximum number of links to be used when
the system dials out or accepts incoming calls.