Specifications

Application Views SSRsystemApp
Device Management Page 24 Efficient Networks DSL Router Series
Sys Operation
Save or load the system configuration (only what
is defined in this group) to/from FLASH memory,
or perform other control operations such as
reboot. Possible values are listed in Table 6.
Sys Software Version
The software version run by the system.
Sys Last Log Event
The last system event reported to the console.
Login Password
Assign or change the administrator’s password
for login.
Write Timeout
Sets and retrieves a timeout value (in minutes)
during which a user logged in can modify objects.
Default -- 10 minutes (until changed).
No security timeout -- set to 0.
Write Timer
This object retrieves the current security timer
value. It returns how many minutes are left (if
any) before a new login must be performed.
Default Single User
Network Address Translation (NAT) has rendered
this object obsolete. For backwards compatibility
purposes, this object still allows you to set the IP
address of the client for which IP address
translation is to be performed.
Internet Firewall
Enables or disable the internet firewall filter. The
filter discards any IP packet arriving from the
WAN with a source IP address belonging to the
LAN.
IPX Supported
Indicates whether IPX is supported in the router
software.
MIB Compatibility
Indicates that this private MIB is fully compatible
with RFC 1155.
Table 6: System Operation Values
Value Description
save Save to Flash.
load Load to Flash (not recommended).
erase Erase configuration in Flash.
reboot Reboot after syncing file system.
set-clock Set the RTC with fpSysXXX values.
reboot-
likefactory
Erase config files and reboot.
reboot-like-new Erase config/autoexec files and reboot.