Specifications

Application Views SSRetherApp
Device Management Page 22 Efficient Networks DSL Router Series
interface when IP routing is enabled.
IP RIP Multicast Address
Allows you to set or retrieve the RIP 2 Multicast
address for this LAN interface.
NAT State
If IP protocol is routed through this interface, this
value determines whether IP address/port
translation is performed via this LAN interface.
Ethernet NAT Information View
Access: Fr o m the Icon Subviews menu for the
SSRetherApp Application icon, select Ethernet NAT
Information.
This view contains the Ethernet Network Address
Translation (NAT) Host Mapping table which
provides the following information:
First Private IP Address
The first private IP address that begins the range
of private IP addresses mapped to public IP
addresses.
Last Private IP Address
The last private IP address that ends the range of
private IP addresses mapped to public IP
addresses.
First Public Address
The first public IP address that begins the range
of public IP addresses mapped to private IP
addresses.
NAT Host Mapping Status
The value of this field determines whether an
object in this table will be created, modified or
deleted.
Ethernet IP Translation
Information View
Access: From t he Icon Subviews menu for the
SSRetherApp Application icon, select Ethernet IP
Translation.
This view contains the ethernet server IP
Translation Server Table which contains the
following information about server selection when
doing IP address translation:
IP First Private Port
First private port, in range, used by the server.
IP First Translation Port
First public port, in range, used by this server.
IP Last Translation Port
Last public port, in range, used by this server.