Specifications

Application Views SSRetherApp
Device Management Page 21 Efficient Networks DSL Router Series
IP State
Determines whether the IP protocol is routed via
this LAN interface.
IPX State
Determines whether the IPX protocol is routed via
this LAN interface.
IP Net Address
Allows you to set or retrieve the IP address for this
LAN interface.
IP Net Mask
Allows you to set or retrieve the IP network mask
for this LAN interface.
IPX Net Address
Allows you to set or retrieve the IPX external
network number for this LAN interface.
Ipx Frame Type
Allows you to set or retrieve the IPX frame type,
generated by the router, for this interface.
Ether IP Opt Recv RIP
Allows the processing of IP RIP 1 and RIP 2
packets received from this LAN interface.
Ether IP Opt Send RIP
Allows sending IP RIP 1 compatible packets to the
LAN interface when IP routing is enabled.
Ether IP Opt Recv RIP Default
When routing is enabled, this allows you to
update the IP routing table with the default route
received on this LAN interface.
Ether IP Opt Send RIP Default
When IP routing is enabled, this allows the
system to advertise itself as the default router on
this LAN interface.
IPX Str Next Address
Allows you to set or retrieve the IPX external
network number for this LAN interface.
IP Default Gateway
Allows you to set or retrieve the IP address for the
default gateway and assign it to the interface
specified in Port Number.
Ether IP Opt Recv RIP1
Allows the processing of IP RIP 1 packets received
from this LAN interface.
Ether IP Opt Send RIP1
Allows sending IP RIP 1 packets to this LAN
interface when IP routing is enabled.
Ether IP Opt Recv RIP2
Allows the processing of IP RIP 2 packets received
from this LAN interface.
Ether IP Opt Send RIP2
Allows sending IP RIP 2 packets to this LAN