Specifications

Application Views SSRetherApp
Device Management Page 20 Efficient Networks DSL Router Series
DL Boot Partition Status
Status of the boot partition(s). Possible values are
listed in Table 5.
DL Local Filename
Filename used on the local file system, whenever
a TFTP download or upload is being processed.
DL Boot Version
The “boot” code version.
DL Boot Reason
Reason for the last reboot, possible values are:
power-up, reset-switch, software-reboot, double-
bus-fault, hardware-watchdog, loss-of- clock,
suicide, and other.
SSRetherApp
This major application (model type SSRetherApp)
provides the following application-specific
subviews:
• Ethernet Information View (see below)
• Ethernet NAT Information View (Page 22)
• Ethernet IP Translation Information View
(Page 22)
Ethernet Information View
Access: From the Icon Subviews menu for the
SSRetherApp Application icon, select Ethernet Information.
This view contains two tables which provide the
following information about the configuration of
the LAN interfaces. Double-clicking an entry
within either table will open the Ethernet
Configuration View (detail), which allows you to
configure the information for that particular
entry.
Port Number
A unique value that identifies the interface port.
Bridge State
The current bridging status of the LAN port;
either enabled or disabled.
Table 5: Boot Partition Status Values
Value Description
good All partitions contain a valid “checksum”.
bad One or more partitions contains an invalid
“checksum”.
inProgress A correction of an invalid partition is in
progress