Specifications

Device Views Interface Status View
Device Management Page 12 Efficient Networks DSL Router Series
Network Type Label
This label identifies the type of network to which
the interface is connected. Double-click the label
to open the Model Information view for the
interface.
Physical Address Label
This label displays the physical (MAC) address of
the interface. Double-click this label to open the
IF Address Translation Table.
IP Address Label
This label displays the IP address for the
interface. Double-click this label to open the
Secondary Address Panel (Page 13), which lets
you change the address and mask for the
interface.
Interface Icon Subviews Menu
Table 2 (Page 12) lists the Interface Icon Subviews
menu options available for the supported DSL
devices.
Interface Status View
Access: From the Icon Subviews menu for the Device
icon, select IF Status.
This view provides the following information on
the operational status of the interface and allows
you to enable or disable the port:
Operational Status
The current state of the interface (ON, OFF, or
Testing).
Administrative Status
This button allows you to select the desired
operational state of the interface (ON, OFF, or
Testing).
Table 2: Interface Icon Subviews Menu
Option Opens the …
Detail Interface Detail view, which displays
Packet, Error, and Discard Breakdown
pie charts. For more information, see
SPECTRUM Views.
IF Status Interface Status View (Page 12).
IF Configuration Device Configuration View (Page 43).
IF Address
Translation
Table
Interface Address Translation Table
view, which shows the Physical and
Network address for each interface.
Secondary
Address Panel
Secondary Address Panel (Page 13).