User`s guide

9031532 E4 The RingView Modeling Process
2-7
RingView Modeling
Managed Application Model Types
FddiMAC Used to model the intelligent connection between an
MMAC-Plus module and the Flexible Network Bus
(FNB) on the backplane of the MMAC-Plus chassis.
FddiNoMAC Used to model a non-intelligent connection between an
MMAC-Plus module and the Flexible Network Bus
(FNB) on the backplane of the MMAC-Plus chassis.
Created by RingView
GenFDDIMac_I Used for modeling applications associated with devices
that support the 1285 FDDI MIB and have been
modeled with either the GnSNMPDev model type or a
specific third-party model type. The GenFDDIMac_I
model appears in the Application view of the
associated GnSNMPDev model and on the device port
of an FDDI interface within the DevTop view.
GenFDDIMac_II Used for modeling applications associated with devices
that support the 1512 FDDI MIB and have been
modeled with either the GnSNMPDev model type or a
specific third-party model type. The GenFDDIMac_II
model appears in the Application view of the
associated GnSNMPDev model and on the device port
of an FDDI interface within its DevTop view.
GenFDDIMac_NM Used for modeling MAC addresses of non-manageable
devices that are determined to be part of the ring but
for which no corresponding model exists in the
SPECTRUM database.