Specifications

Firmware

Version

Matrix E5 3.00.xx

Matrix V2

2.03.xx

2.04.xx

Vertical Horizon

VH−2402S

VH−2402−L3

VH−4802

VH−8TX1UM/MF

2.05.19

1.00.16

2.05.05

2.04.07.08

RoamAbout Access Point 3000 1.00.xx

SecureStack B2 1.00.xx

SecureStack C2 1.00.20

CDP Implementation

CDP must be disabled on the downstream devices when attached to a device using multi−user authentication

(such as the Matrix N−Series Platinum). ASM (by design) excludes CDP ports from responding to a threat. If

a device using multi−user authentication has a downstream device attached, such as a RoamAbout R2 that is

running CDP, then ASM will not be able respond to threats from the port where it is attached.

Use NetSight Console's CDP Status FlexView to disable CDP on downstream devices.

For example, from Console:

Select the Wireless Device Group in Console's left (tree) panel.1.

Open the CDP Status FlexView in the right panel.2.

Select all rows and use the Table Editor to set the Global Status to disable for all devices.3.

Devices/Firmware that do not support CDP

Product Family Firmware