Specifications

Buttons
Test
This button allows sending a test syslog message to simulate a notification sent in response to a
network threat.
SNMP Trap
This window lets you configure notifications that send a SNMP Trap that will be triggered with your response
to network threats.
Click areas of the window for more information.
Name
The name assigned to this notification.
Type
Set the Type to SNMP Trap for this window.
SNMPv3 User Name
This is the user name for the credential that will be used when sending the trap to the Trap Receiver.
Authentication Type
MD5 or SHA1 or None, selected from this drop−down list.
Authentication Password
This is the password (between 1 and 64 characters in length) that will be used to determine
Authentication. This field is disabled for Authentication Type, None.
Privacy Type
DES or None, selected from this drop−down list. These settings are disabled if Authentication Type
None is selected.
Privacy Password
Automated Security Manager Help
Buttons 147