Specifications

9030981 E5 Configuration View
3-5
ETSMIM Device Configuration View
Serial Port Configuration View
Ethernet Interface Configuration Detail View
Operational Status
The current operational state of the port as either up, down, or testing. You
can modify this field.
Administrative Status
This field provides a button that allows you to set the desired operational
state of the port.
Last Status Change
The system uptime that the port entered its current operational state.
Physical Address
The Ethernet (MAC) address of the port.
Bandwidth
The estimated bandwidth of the interface measured in bits per second. For
interfaces that do not vary in bandwidth or for which no accurate estimate can
be made, a nominal bandwidth is provided.
Largest Datagram Supported
The largest Maximum Transmission Unit (MTU), measured in octets, that can
be transmitted or received by the port.
Length of Output Packet Queue
The length of the outbound packet queue in packets.
Serial Port Configuration View
You can access this view by clicking on the Serial Ports Detail Button in the
ETSMIM Configuration view. This view contains entries in a Serial Port
Configuration table. Double-click on any entry in the table to access the Serial
Port Configuration Detail view for the selected entry with more detailed
information in a modifiable format.
Serial Ports
The number of ports the device supports (defaults to 16).
Serial Port Configuration Table
This table includes the following fields described below: Type, Speed, Bits,
Stopbits, Parity, In Flow Control, and Out Flow Control. Double-clicking on
any entry accesses the Serial Port Configuration Detail View for that entry.
Fields for the detail view are presented below.