- Cabletron IP Router Reference Guide

Bridge MIB
4-11
dot1dTpFdbStatus {dot1dTpFdbEntry 3}
Integer Read-Only
The status of this entry. The meanings of the values are other (1)
none of the following. This would include the case where some
other MIB object (not the corresponding instance of
dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being
used to determine if and how frames addressed to the value of the
corresponding instance of dot1dTpFdbAddress are being
forwarded. invalid (2) this entry is not longer valid (e.g., it was
learned but has since aged-out), but has not yet been flushed from
the table. learned (3) the value of the corresponding instance of
dot1dTpFdbPort was learned, and is being used. self (4) the value
of the corresponding instance of dot1dTpFdbAddress represents
one of the bridge’s addresses. The corresponding instance of
dot1dTpFdbPort indicates which of the bridge’s ports has this
address. mgmt (5) the value of the corresponding instance of
dot1dTpFdbAddress is also the value of an existing instance of
dot1dStaticAddress.
dot1dTpPortTable {dot1dTp 4}
Not Accessible
A table that contains information about every port that is
associated with this transparent bridge.
A table that contains all Ethernet ports, not just those enabled for
bridging.
dot1dTpPortEntry {dot1dTpPortTable 1}
Not Accessible
A list of information for each port of a transparent bridge.
dot1dTpPort {dot1dTpPortEntry 1}
Integer Read-Only
The port number of the port for which this entry contains
Transparent bridging management information.