- Cabletron IP Router Reference Guide

4-2
Bridge MIB
dot1dBaseType {dot1dBase 3}
Integer Read-Only
Indicates what type of bridging this bridge can perform. If a bridge
is actually performing a certain type of bridging this will be
indicated by entries in the port table for the given type.
The ELS10-26 is always transparent-only (2).
dot1dBasePortTable {dot1dBase 4}
Not Accessible
A table that contains generic information about every port that is
associated with this bridge.
All ELS10-26 Ethernet ports are included in this table, regardless of
whether any form of bridging is currently enabled for the ports.
dot1dBasePortEntry {dot1dBasePortTable 1}
Not Accessible
A list of information for each port of the bridge.
dot1dBasePort {dot1dBasePortEntry 1}
Integer Read-Only
The port number of the port for which this entry contains bridge
management information.
Identical to dot1dBasePortIfIndex.
dot1dBasePortIfIndex {dot1dBasePortEntry 2}
Integer Read-Only
The value of the instance of the ifIndex object for the interface
corresponding to this port.
dot1dBasePortCircuit {dot1dBasePortEntry 3}
Object Identifier Read-Only
For a port which (potentially) has the same value of
dot1dBasePortIfIndex as another port on the same bridge, this
object contains the name of an object instance unique to this port.