- Cabletron IP Router Reference Guide

2-34
TCP/IP MIB-II
ctIfPortType {ctIfPortEntry 3}
DESCRIPTION
This defines the specific type of port (EPIM, TPIM). This is defined
within ctron-oids.
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
OBJECT IDENTIFIER: 1.3.6.1.4.1.52.4.3.3.3.1.1.3
The OID will actually be 1.3.6.1.4.1.52.4.3.3.3.1.1.1.X.Y where X is
the interface number and Y is the port requested. X will increment
from 1 to 28 (25 Ethernet, 2 Fast Ethernet, and the LCM port). Y
will always be 1 because there is only one port per interface. This
variable should describe the hardware device itself by media type
and type of connection. We have an Ethernet connection to an
RJ45. This means that we will return an OID of
1.3.6.1.4.1.52.3.8.1.1.1.6 to show portRJ45 (CTRON-OIDS):
oid_value_assignment.
ctIfPortLinkStatus {ctIfPortEntry 4}
This defines the status of the port connection.
SYNTAX INTEGER {notLinked(1), linked(2), notApplica-
ble(3)}
ACCESS read-only
STATUS mandatory
OBJECT IDENTIFIER: 1.3.6.1.4.52.4.3.3.3.1.1.4
The OID will actually be 1.3.6.1.4.1.52.4.3.3.3.1.1.1.X.Y where X is
the interface number and Y is the port requested. We will return
the link status for the ethernet and fast ethernet ports. We will
return notApplicable (3) for the UART port.