- Cabletron IP Router Reference Guide

TCP/IP MIB-II
2-31
interface has been closed and then opened again. A read of
ctIfLAA will always return the same values as IfPhysAddress,
except in the case where; o ctIfLAA has been set, but interface has
not yet been closed and reopened, in this case the last set value is
returned. Note that a read of IfPhysAddress will always return the
physical address currently being used by the interface.
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-write
STATUS mandatory
ctIfDuplex {ctIfEntry 5}
This defines the capability of the underlying hardware in
supporting full duplex. This object will have a value of
fullDuplex(3) if all hardware is capable of supporting full duplex
operation.
SYNTAX INTEGER {other(1), standard(2), full(3)}
ACCESS read-only
STATUS mandatory
OBJECT IDENTIFIER: 1.3.6.1.4.1.52.4.3.3.2.1.1.5
The OID will actually be 1.3.6.1.4.1.52.4.3.3.2.1.1.5.X where X is the
interface number requested. This is what the port is set to, NOT of
what it is capable. It will report full (3) or standard (2) on ethernet
ports, and other (1) for fast ethernet ports. It will report other (1) on
our UART (Local Console Management or PPP) port.
ctIfCapability {ctIfEntry 6}
DESCRIPTION
Defines the capability of the underlying hardware in supporting
full duplex. This object will have a value of fullDuplex (3) if all
hardware is capable of supporting full duplex operation.