- Cabletron IP Router Reference Guide

2-2
TCP/IP MIB-II
the Cabletron MIB sysID object, i.e., {1 3 6 1 4 1 97 5 7}. Special
versions of the ELS10-26, made for third-party vendors may use
different values for sysID.
sysUpTime {system 3}
TimeTicks Read-Only
The time, in centiseconds, since the ELS10-26 was last booted.
sysContact {system 4}
DisplayString Read-Write
The name and address of the contact person for the ELS10-26.
sysName {system 5}
DisplayString Read-Write
The Internet name of the contact person for the ELS10-26. The
LCM prompt consists of sysName followed by “>”. (LCM is a
non-intelligent terminal interface that can be used to configure and
monitor status for the ELS10-26.)
sysLocation {system 6}
DisplayString Read-Write
The physical location of the ELS10-26.
sysServices {system 7}
Integer Read-Only
The sum of the services supported by the ELS10-26. Values
include:
(2) the ELS10-26 is a bridge only
2.2 INTERFACES GROUP
interfaces {mib-2 2}
The TCP/IP Interfaces Group parameters are described below.