- Cabletron IP Router Reference Guide

Introduction
1-11
The zero at the end (.0), indicates that this is a single instance, and
that only one value can be returned. Whenever you are looking for
a variable with only one value, you must include the .0 at the end.
Some variables may have multiple values, such as an IP address
and an associated port number.
Table 1-2 MIB-II Group Descriptions
There are additional groups under MIB-II, but all groups are not
supported by the ELS10-26.
MIB-II Group Number (1.3.6.1.2.1.)
System 1
Interfaces 2
Address Translation 3
Internet Protocol (IP) 4
Internet Control Message (ICMP) 5
Transmission Control Protocol (TCP) 6
User Datagram Protocol (UDP) 7
Exterior Gateway Protocol (EGP) 8
CMIP over TCP (CMOT) 9
Transmission 10
SNMP 11
GenericIF 12
AppleTalk 13
Open Shortest Path First (OSPF) 14
Border Gateway Protocol (BGP) 15
Remote Network Monitoring (RMON) 16
Bridge 17