- Cabletron IP Router Reference Guide
Table Of Contents
- Title Page
- Notice
- Contents
- Introduction
- TCP/IP MIB-II
- 2.1 System Group
- 2.2 Interfaces Group
- 2.3 Address Translation Group
- 2.4 IP Group
- 2.5 ICMP Group
- 2.6 TCP Group
- 2.7 UDP Group
- 2.8 EGP Group
- 2.9 OIM Subtree
- 2.10 Transmission Group
- 2.11 SNMP Management Group
- 2.12 Enterasys Interface Group
- 2.13 Enterasys Interface Port Group
- 2.14 Enterasys Com Port Configuration Group
- 2.15 SNMP Version Group
- 2.16 Trap Description
- 2.17 Enterasys MIB 2 Extensions
- Ethernet MIB
- Bridge MIB
- PPP MIB
- ELS10-26 MIB
- 6.1 System Group
- 6.1.1 Hardware Configuration Group
- 6.1.2 LXSW Configuration Group
- 6.1.3 Administration Group
- 6.1.4 Software Distribution Group
- 6.1.5 Addresses Configuration Group
- 6.1.6 Enterasys Interfaces Group
- 6.1.7 Enterasys Dot3 Group
- 6.1.8 Enterasys UART Interface Group
- 6.1.9 Enterasys Protocol Group
- 6.1.10 Enterasys Trunking Group
- 6.1.11 Enterasys Workgroup Management Group
- 6.1.12 Enterasys Trap Management Group
- 6.1.13 Ping Management MIB
- 6.1.14 Traceroute
- 6.1.15 Traceroute Management MIB
- 6.1.16 Port Mirroring
- 6.1 System Group
- Traps
Traps
7-3
lxRxQuesTrap (4) - Sent whenever the number of times that the
port’s receiver has missed receiving packets due to buffer space
shortages has exceeded the port’s limit.
Cabletron MIB variables include:
• lxTrapSeverity
• lxifRxQueues
lxTxStormFlagTrap (5) - Sent whenever multicast storm protection
has been invoked for the port.
Cabletron MIB variables include:
• lxTrapSeverity
lxTxCongestsTrap (6) - Sent whenever packets destined for the unit
itself were discarded due to lack of buffer space.
Cabletron MIB variables include:
• lxTrapSeverity
• lxadminNamReceiveCongests
lxDebugStringIdTrap (8) - Send whenever the unit has a debug text
string to be displayed. The text strings are sent in a stream-like
fashion.
Cabletron MIB variables include:
• lxTrapSeverity
• lxdebugStringId
• lxdebugString
lxLpbkOperationTrap (9) - Send whenever the unit has finished a
loop back test, or a loop back error has been detected.
Cabletron MIB variables include: