- Cabletron IP Router Reference Guide

ELS10-26 MIB
6-25
lxprotoIfIndex {lxsprotoEntry 1}
Integer Read-Only
Identifies the interface (port) to which this entry’s information
belongs. The value of this variable corresponds to lxifIndex, as well
as to most of the other port identification values in related MIBs.
lxprotoBridge {lxsprotoEntry 2}
Integer Read-Write
Defines the bridging method to be applied to frames received at, or
destined for this port. Ethernet and FDDI ports may be configured
for transparent, srt, or none. Token Ring ports may be configured
for any of the four options. The UART may only be configured to
none.
lxprotoSuppressBpdu {lxsprotoEntry 3}
Integer Read-Write
Allows transmission of spanning tree protocol packets to be
suppressed. Values include:
• normal (1) – 802.1d Spanning Tree protocol packets are
transmitted as usual
• suppressed (2) – these packets are not transmitted. This option
may be useful for interoperability with non-802.1d spanning
tree protocols.
lxprotoRipListen {lxsprotoEntry 4}
Integer Read-Write
Specifies whether the port should listen for internet RIP packets so
the ELS10-26 can build a routing table for the unit. Values include:
• enabled (1)
• disabled (2)