- Cabletron IP Router Reference Guide
Table Of Contents
- Title Page
- Notice
- Contents
- Introduction
- TCP/IP MIB-II
- 2.1 System Group
- 2.2 Interfaces Group
- 2.3 Address Translation Group
- 2.4 IP Group
- 2.5 ICMP Group
- 2.6 TCP Group
- 2.7 UDP Group
- 2.8 EGP Group
- 2.9 OIM Subtree
- 2.10 Transmission Group
- 2.11 SNMP Management Group
- 2.12 Enterasys Interface Group
- 2.13 Enterasys Interface Port Group
- 2.14 Enterasys Com Port Configuration Group
- 2.15 SNMP Version Group
- 2.16 Trap Description
- 2.17 Enterasys MIB 2 Extensions
- Ethernet MIB
- Bridge MIB
- PPP MIB
- ELS10-26 MIB
- 6.1 System Group
- 6.1.1 Hardware Configuration Group
- 6.1.2 LXSW Configuration Group
- 6.1.3 Administration Group
- 6.1.4 Software Distribution Group
- 6.1.5 Addresses Configuration Group
- 6.1.6 Enterasys Interfaces Group
- 6.1.7 Enterasys Dot3 Group
- 6.1.8 Enterasys UART Interface Group
- 6.1.9 Enterasys Protocol Group
- 6.1.10 Enterasys Trunking Group
- 6.1.11 Enterasys Workgroup Management Group
- 6.1.12 Enterasys Trap Management Group
- 6.1.13 Ping Management MIB
- 6.1.14 Traceroute
- 6.1.15 Traceroute Management MIB
- 6.1.16 Port Mirroring
- 6.1 System Group
- Traps
ELS10-26 MIB
6-21
lxdot3LedOn {lxdot3Entry 3}
Integer Read-Only
An integer indicating whether the port’s programmable LED is on.
Values include:
• led-on (1)
• led-off (2)
lxdot3RxCollisions {lxdot3Entry 4}
Counter Read-Only
Counter indicating the number of receive collisions.
Note: 10BASE-T cannot count received collisions.
lxdot3RxRunts {lxdot3Entry 5}
Counter Read-Only
Counter indicating the number of runt packets received (and
discarded).
lxdot3RxLateColls {lxdot3Entry 6}
Counter Read-Only
Counter indicating the number of packets received with a late
collision (and discarded).
lxdot3TxJabbers {lxdot3Entry 7}
Counter Read-Only
3
Counter indicating the number of packets transmitted with jabber
errors.
3.
These statistics are only updated if the ELS10-26 has been configured to gather
extended statistics (lxadminStatsExtended).