- Cabletron IP Router Reference Guide

5-6
PPP MIB
pppLinkConfigInitialMRU {pppLinkConfigEntry 1}
Integer Read-Write
The initial Maximum Receive Unit (MRU) that the local PPP entity
will advertise to the remote entity. If the value of this variable is 0
then the local PPP entity will not advertise any MRU to the remote
entity and the default MRU will be assumed. Changes to this
object take effect when the link is next restarted.
Currently, only 8192 is supported and read-only access.
pppLinkConfigReceiveACCMap {pppLinkConfigEntry 2}
Octet String Read-Write
The Asynchronous Control Character Map (ACC) that the local
PPP entity requires for use on its receive side. In effect, this is the
ACC Map that is required in order to ensure that the local modem
will successfully receive all characters. The actual ACC map used
on the receive side of the link will be a combination of the local
node’s pppLinkConfigReceiveACCMap and the remote node’s
pppLinkConfigTransmitACCMap. Changes to this object take
effect when the link is next restarted. The only value supported is
(0) no ACC map.
pppLinkConfigTransmitACCMap {pppLinkConfigEntry 3}
Octet String Read-Write
The Asynchronous Control Character Map (ACC) that the local
PPP entity requires for use on its transmit side. In effect, this is the
ACC Map that is required in order to ensure that all characters can
be successfully transmitted through the local modem. The actual
ACC map used on the transmit side of the link will be a
combination of the local node’s pppLinkConfigTransmitACCMap
and the remote node’s pppLinkConfigReceiveACCMap. Changes
to this object take effect when the link is next restarted. The only
value supported is (0) no ACC map.