User guide

DPT PM2022, PM2042W, PM2122,

PM2142W SCSI and PM3222,

PM3222UW, PM3332UW SCSI RAID

HBAs

Solaris Device Driver:

dpt

Device Types:

SCSI, SCSI RAID

Adapters:

DPT PM2022, PM2042W, PM2122, PM2142W SCSI

DPT PM3222, PM3222UW, PM3332UW SCSI RAID

Bus Type:

EISA

Preconﬁguration Information

DPT PM3222 only: The EPROM should not be earlier than version 7A, and the

SmartROM not earlier than version 3.B.

DPT PM2022 and PM2122 only: The EPROM should not be earlier than version 5E,

and the SmartROM not earlier than version 2.D1.

Supported Settings

• WD1003 Boot Address: Disabled (Secondary)

• IRQ Level: Any legal value between 11 and 15, except 14

Note - Make sure you use edge-triggered interrupts.

• IDE Boot Address: Disabled

• SCSI BIOS ROM Address: Default

• HBA SCSI ID: Default 7

Device Reference Pages 55