User guide

Do not attempt to connect wide targets to the 53C810, 53C815, and 53C860 using a
wide to narrow converter. These configurations are not supported.
If your adapter supports the Symbios Logic SCSI Configuration utility, which can
be accessed by pressing Control-C, do not alter the value of the Host SCSI ID (an
option under the Adapter Setup menu) to anything but 7.
If you experience problems with old target devices, add the following entry to the
/kernel/drv/ncrs.conf file:
target N -scsi-options = 0x0;
where N is the ID of the failing target.
48
Solaris 7 (Intel Platform Edition) Device Configuration Guide ♦ October 1998