User guide

Third-party drivers are provided for the convenience of Solaris customers and are
tested to ensure that they meet acceptable standards of operability. Sun cannot be
responsible for their inclusion in a given release or the timeliness of their availability.
Using Device Reference Pages
Only devices that require special configuration for running Solaris Intel Platform
Edition have Device Reference Pages.
Refer to the device manufacturer’s documentation for procedures to change device
settings.
Run the manufacturer’s DOS utility if available.
When moving adapters for inspection and configuration, note how cables are
inserted in sockets. Some connectors are keyed to prevent incorrect insertion;
others are not.
If a device has selectable configuration parameters, you usually choose the default
settings. The Device Reference Pages show settings the Solaris software supports
and known conflicts.
The following table shows the Device Reference Pages provided with Solaris 7 Intel
Platform Edition.
Device Type Solaris Driver Name Where to Find Device Reference Pages
Disk Interface
ata
“IDE/Enhanced IDE Disk Controller
(Including ATAPI CD-ROM)” on page 18
SCSI Host Bus
Adapters
aic
“Adaptec AHA-1510A, 1520A, 1522A, 1530P,
1532P HBAs” on page 21
aic
“Creative Labs Sound Blaster 16 SCSI-2
Interface” on page 23
aha
“Adaptec AHA-1540B, 1542B, 1542C, 1542CF,
1542CP HBAs” on page 25
eha
“Adaptec AHA-1740, 1742A HBAs” on page
27
12 Solaris 7 (Intel Platform Edition) Device Configuration Guide ♦ October 1998