Specifications

In the second mask, shown in Figure 3.28), configure access to the internal
FTP proxy. By default, automatic generation of filter rules is activated. Select
the IP addresses that should be given access. Select ‘Finish’ to complete the
configuration.
Figure 3.28: Access to the Internal FTP Proxy
The Example, Inc., Configuration
Page 1/2 Internal FTP Proxy Configuration
Only a few basic settings are made here. As usual, the corresponding rules
are generated automatically.
Auto Listen to: activated
FTP Proxy Port: 10021
Maximum Clients: 64
Port reset PASV activated
Same Address activated
As the FTP proxy is transparent and for intranet users, no ‘Magic User’ is
required.
68 Using the FAS