Specifications

Figure 3.19: Dialog for Destination NAT
Source Address Enter the source IP address.
Destination Address Select the destination address.
ICMP Select the message type.
Logging Activate logging of access violations with the ‘Log Access Viola-
tion’ check box (on by default).
The Example, Inc., Configuration
IPFilter Configuration
This is the most time-consuming part of the configuration. In this module,
you should know exactly what effects the entries have.
1. IP Forward: All the rules the FAS cannot generate automatically must
be entered here. These are all rules between two networks that are not
covered on the firewall by a proxy service.
The following rules are required for Example, Inc.:
56 Using the FAS