Specifications

Figure 3.15: Routing
In the next entry line, the search lists are specified, for example,
your-company-inc.com.
If you now click ‘Finish’, the base configuration is completed. The message
appears briefly on the screen to this effect. If conflicts or problems in the con-
figuration are detected, you will see a corresponding error message here.
The Example, Inc., Configuration
Page 1/5 of the Base Setup
The administrator should be able to log indirectly to the firewall in Nurem-
berg via console. For this reason the following configuration is set:
root password not selected
root password: PvdFSiN2
confirm root password: PvdFSiN2
The keyboard on the firewall has a German layout (qwertz) for our host.
This is selected in the drop-down menu for the keyboard.
As the time zone, ‘Europe/Berlin’ has been chosen. A serial console is not
used.
Page 2/5 of the Base Setup
To operate a mail server in Nuremberg, a hard disk must be configured in
this menu. First, ‘Use Hard Disk’ is activated.
50 Using the FAS