Specifications

3
Firewall Administration System (FAS)
Figure 3.14: Routing Dialog
Netmask The relevant netmask.
Interface Select the interface to use.
Save your settings with ‘Ok’. Stop the configuration with ‘Cancel’.
Host Name and Name Server Settings
Configure the host name, domain, and name server as shown in Figure 3.16
on page 51.
Firewall Host Name Enter the name of the firewall host. Avoid names like
gateway or firewall.
Firewall Domain Enter the name of the domain to which the firewall be-
longs.
Name server To configure the resolver correctly, the name server and its
IP address must be given here. If you press




↵ or click ‘Add’ af-
ter entering the IP address, specify additional addresses in the field.
49SuSE Linux – Firewall on CD2