Specifications

Figure 3.13: ISDN Conﬁguration — Part 2

Routing

In a dialog like Figure 3.14 on the next page), view, create, and modify

routes. ‘Add’ creates a new route. Use ‘Edit’ to modify an existing route.

With ‘Delete’, remove a set route from the list.

Routes are conﬁgured in Figure 3.15 on page 50). The following settings can

be made:

Destination Which network or host should the route address? Enter the

network address (e. g., 192.168.0.0).

Gateway If desired, enter the IP address for the gateway.

48 Using the FAS