Specifications

3
Firewall Administration System (FAS)
Figure 3.12: ISDN Configuration — Part 1
Interface’s Phone Number (MSN) Enter the phone number of the
ISDN device (MSN).
Provider’s Phone Number Phone number of the provider
Phone Number for dial-in Dial in phone number
Maximum Dial Attempts Maximum number of dial attempts
These details are required under ‘Interface Configuration’:
Encapsulation Choose here between syncppp and rawip.
Interface Enter the interface name. The default is ippp0, but this
value can be changed.
Local IP A local IP address is given here, which can be retained. It is
only necessary to change this value if a real network exists with
this address.
Remote IP The remote IP address. The default value can also be kept
here unless you want to specify a real address. Then you must
ensure that there can be no collisions.
Direction Choose the direction: external or internal
Enable multilink Activate this check box if you want to specify a
slave interface.
Slave Interface name Enter the interface name for the slave interface.
Click ‘Select ISDN Card’ if you want to return to the configuration dia-
log for the ISDN card. To close the configuration, click ‘Ok’.
When you have configured all interfaces, click ‘Next’.
47SuSE Linux – Firewall on CD2