Specifications

Figure 3.9: Network Interfaces
1. Make these settings in the ethernet dialog (Figure 3.11 on the facing
page):
Interface Names are automatically allocated in sequence, but can be
changed.
Virtual If required, enter a virtual device name in the field next to
this.
IP address IP address to assign to the interface.
Netmask The netmask for the IP address.
Direction internal or external. Is the interface connected to the in-
tranet, to the DMZ, or to the Internet?
Confirm the settings with ‘Ok’. Abort with ‘Cancel’. The newly config-
ured interface now appears in the list. With ‘Edit’, modify the configu-
ration of an existing interface. To do this, choose an interface from the
list and click ‘Edit’. ‘Delete’ removes the interface selected.
44 Using the FAS